,

TX6A™ 10Gig™ Shielded Copper Cable – F/UTP


Category 6A cable shall be constructed of 23 AWG copper conductors with PE CM, CMR or LSZH insulation. The copper conductors shall be twisted in pairs and separated by an integrated pair separator.

 31,000

PANDUIT CAT6A F/UTP DESCRIPTION

Specifications

Category 6A cable shall be constructed of 23 AWG copper conductors with PE CM, CMR or LSZH insulation. The copper conductors shall be twisted in pairs and separated by an integrated pair separator. All four pairs shall be surrounded by an overall metallic foil shield within a low smoke zero halogen jacket. The TX6A™ 10Gig™ Shielded Copper Cable must be installed as part of a complete TX6A™ 10Gig™ Shielded Copper Cabling System to achieve 10GBASE-T certified performance.

Technical information

Electrical performance:
Certified channel performance in a 4-connector configuration up to 100 meters and exceeds the requirements of ISO 11801 Class EA and ANSI/TIA-568-C.2 Category 6A standards for supporting 10GBASE-T transmission over twisted-pair cabling systems as part of the Panduit® TX6A™ 10Gig™ Shielded Copper Cabling System
Certified component performance up to 100 meters and meets or
exceeds the component requirement of the ISO/IEC 11801 Category
6A and ANSI/TIA-568-C.2 Category 6A standards for supporting 10GBASE-T transmission over twisted-pair cabling systems

Conductors/insulators:

23 AWG solid bare copper wire covered by PE insulation
Flame rating:
LSZH: IEC 60332-1, IEC 60754-1, IEC 60754-2, IEC 601034-2,
EN 50575:
Euroclass Dca – s2, d2, a1
CM: UL 1685
CMR: UL 1666
CMP: NFPA 262
Standards Compliance:
UL Listed CMP-LP 0.7A and CMR-LP 0.5A

Installation tension:

110 N (25 lbf) maximum
PoE compliance:
Meets IEEE 802.3af, IEEE 802.3at and IEEE 802.3bt for PoE applications
Temperature rating:
-4°F to 167°F (-20°C to 75°C)
Installation (Operation)
Cable jacket:
LSZH, CM, CMR, CMP

Cable diameter:

LSZH: 7.3mm (0.287 in.) nominal
CM, CMR: 7.2mm (0.284 in.) nominal
CMP: 7.5mm (0.296 in.) nominal
Cable weight:
LSZH: 16 kg/305m (35 lbs./1000 ft.)
CM, CMR: 15 kg/305m (33 lbs./1000 ft.)
CMP: 19kb/305m (42 lbs./1000 ft.)

Packaging:

LSZH: 18 kg/ 305m (40 lbs./1000 ft.) on a reel
CM, CMR: 17 kg/ 305m (37 lbs./1000 ft.) on a reel
CMP: 20kg/305m (46 lbs./1000 ft.)
Packaged tested to ISTA Procedure 1A
key features and benefits
Integrated pair divider:
Separates pairs for exceptional cable performance

Overall foil shield:

Provides superior structural integrity and reduces low
frequency external interference to ensure the exceptional cable
performance at all swept frequencies up to 500 MHz
Internal drain wire:
Facilitates means of grounding the cable and provides for efficient
performance and protection of network investment
Descending length Easy identification of remaining cable reduces installation time and

cable markings:

cable scrap

Bulk packaging:

Supplied 305m (1000 ft.) to a reel

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “TX6A™ 10Gig™ Shielded Copper Cable – F/UTP”

There are no reviews yet.